National Foundry Machinery Standardization Technical Committee The fifth meeting of the sixth national foundry machinery standardization technical committee The conference and standard review meeting will be held in Guangxi from December 12 to 15, 2023. Nanning City held the meeting. The members of the National Foundry Machinery Standardization Technical Committee, A total of 78 members of the Technical Committee and invited representatives attended the on-site meeting. Among them, there are 55 members and representatives of the Standardization Administration of China. The meeting was chaired by Hou Ruoxian, the vice chairman of the Technical Committee for Mechanical Standardization, presided over the meeting. Cui Ruiqi, General Manager of Jinan Foundry and Forging Institute Inspection and Testing Technology Co., Ltd. Delivering a speech on behalf of the chairman. As the responsible unit of the Secretariat, Mr. Cui Members and experts were very busy, but they still came to attend this meeting, which we would like to express our welcome and thank you Everyone has long supported the Secretariat. President Cui emphasized that this meeting The task of standard review is arduous, and I hope that all the committee members and the delegates attending the meeting will We will be responsible and carefully review all standards, strictly The standard quality guarantee enables the standard to fully play its role in the high-quality development of the industry. leadership and guidance.
The deputy chairman read out the “Awards for the 2023 Casting Industry” Advanced collective, exemplary individual and international standard system of manufacturing machinery standardization Decision on Outstanding Contribution Award for Unit and International Standardization”, 19 units with the title of “Advanced Collective” and 10 units with the title of “Advanced Standardization Workers” 24 comrades with the title of “author” and the title of “international standard setting unit” 13 units and 17 individuals who won the title of “Outstanding Contribution Award for International Standards” Comrade was commended, and then the relevant supplements of the State Administration for Market Regulation were read out. The committee members’ documents were issued and certificates were given to the committee members.
Lu Jun, the secretary general of National Foundry Machinery Standardization Technical Committee, Members and representatives of the meeting made a report on the 2023 national foundry machinery standardization technology Summary of the work of the Committee, report on the use of the secretariat funds in 2023 and the 2024 annual work plan, and to implement the national standardization management committee Relevant Matters on Establishing a Liaison Mechanism for National Standardization Technical Committees We plan to cooperate with SAC/TC208 National Technical Committee on Mechanical Safety Standardization The committee established a liaison relationship, which was reviewed and approved by all committee members and representatives. In addition, The Secretariat has consulted all committee members and representatives on the three options for the logo of the Technical Committee on Standards. Li Chen, the secretary of National Foundry Machinery Standardization Technical Committee, A representative made a special report on “Note on Standard Project Application”. Afterwards, the standard system framework diagram of foundry machinery was introduced and reviewed; Afterwards, the review of the annual industry standard was introduced and arranged. At this meeting, all committee members and representatives The draft of industry standards was reviewed, and 13 industry standards were After several days of intense and orderly work, the committee members and With the joint efforts of the representatives, the meeting completed all the agendas and achieved a complete success. Work.
reached the international advanced level, led by Lijin Research on Key Technologies of 7000t Ultra Large Die Casting Equipment The project of “Research and Application” passed the appraisal of scientific and technological achievements
Recently, led by Shenzhen Lingwei Technology Co., Ltd. of Lijin Group, The project of “Research and Application of Key Technologies for 7000 t Ultra-large Die Casting Equipment” Technological Achievement Appraisal Conference was held at Xiaopeng Automobile Guangzhou Intelligent Networked Automobile Intelligent Manufacturing Base held on the ground. Executive Vice President and Secretary General of Guangdong Mechanical Engineering Society, Deputy Secretary General, Vice President of Guangdong Intelligent Robot Research Institute Xiaopeng Automobile process technology expert, body technology expert, Li Jin Group Technology Development Center senior engineer Cai Hengzhi and other experts The project is led by Shenzhen Lingwei Technology Co., Ltd. of Lijun Group and Mechanical (Shenzhen) Co., Ltd., Zhaoqing Xiaopeng New Energy Investment Co., Ltd., Huazhong University of Science and Technology, Guangzhou Branch of Zhaoqing Xiaopeng New Energy Investment Co., Ltd. Fuxin Lijin North Machinery Co., Ltd., Fuxin Lida Iron and Steel Foundry Co., Ltd. The project is jointly completed by Guangdong Intelligent Robot Research Institute and Guangdong Province Intelligent Robot Co., Ltd.
The project aims to solve the deformation of the “template-base-guide rail” of heavy-duty linear guide rail Problems such as the reduction in rigidity caused by superposition are addressed by proposing a large thin-walled body Configuration design of a new type of integrated die casting equipment for structural parts.