As shown in the figure, it is produced with the help of computer simulation φ 400mm and φ Rough finished products of 580mm centrifugally cast cylinder liners.
It can be seen that the horizontal centrifugal casting of cylinder liner has complete mold filling and good forming quality, which verifies the accuracy of the simulation results.
| Texture of material | Mold temperature / ℃ | Molten iron weight / kg | Pouring temperature / ℃ | Pouring time / S | Speed / (R · min － 1) |
| CrNiCuP | 200±50 | 760±3 | 1410±20 | 100±20 | 540±20 |
The final optimized process parameters are shown in Table 1 and table 2.
| Texture of material | Mold temperature / ℃ | Molten iron weight / kg | Pouring temperature / ℃ | Pouring time / S | Speed / (R · min － 1) |
| Vanadium titanium cast iron | 180±30 | 2166±3 | 1410±30 | 240±20 | 400±20 |