Scientific

Research status of rapid sand casting at home and abroad

zhycasting / February 21, 2020

Rapid Prototyping technology relies on the point by point accumulation forming of materials, which is not restricted by the manufacturability […]

zhycasting / February 13, 2020

The casting process of part structure usually refers to that the structure of the part itself should meet the requirements

zhycasting / February 8, 2020

Features: Coarse graphite: the size of graphite in the metallographic structure is very large, or there is massive graphite, and

zhycasting / February 7, 2020

Features: Poor lower core (core deviation, core dropping, sand squeezing and core breaking) Causes: A. Mask is not adjusted well,

zhycasting / February 7, 2020

When the wall thickness of high-temperature alloy castings such as adjusting piece and sealing piece is changed from 1.1mm to

zhycasting / February 5, 2020

Features: The white cast is hard and brittle, and it is difficult to break and turn white Causes: A. Casting

zhycasting / January 29, 2020

1, Characteristics There are defects in some parts of the casting, which often appear in the thin-walled part, the farthest

zhycasting / January 11, 2020

Fast graphite fragmentation The broken fast graphite is a kind of deformed graphite which often appears in the large end