Casting process of EPC for anode steel claw（black area）
The black area is the casting part, which is divided into two parts: embedded box and casting. The embedding process […]
News
casting technology
Scientific
Preshrunk technology of typical large iron castings
Content of preshrunk process design for large iron castings The design factors of preshrunk technology for large iron castings mainly
News
Casting technology of EPC for anode steel claw（yellow area）
The yellow area is the coating part. The first step in the yellow area is to mix the coating, and
News
Casting process of EPC for anode steel claw(white area)
EPC is divided into white area, yellow area and black area, and each part is closely linked and highly related.
News
Casting technology of EPC for anode steel claw
The anode steel claw for electrolytic aluminum is also called electrolytic claw. There are parallel three claws, four claws, three-dimensional
News
Determination of casting process plan for fixture casting
Production conditions, structure and technical requirements of fixture Product production nature – mass production Part material – 35Cr The part
Scientific
Research status of Squeeze Casting Technology
A large number of researches and applications have been carried out on the squeeze casting forming technology in foreign countries.
Scientific
Introduction of numerical simulation method for filling and solidification process of casting
Numerical simulation of casting filling is to analyze the heat transfer phenomenon and forming ability of high temperature liquid metal
News
The history and development of foundry technology in China
Casting is the process of melting metal into a liquid that meets certain requirements and pouring it into the mold.
News
Application of sand casting technology in valve production
The quality of mold (core) sand has a great influence on the quality of casting. For example, the defects of
News
Brief introduction of casting and forming technology
Casting is the process of melting metal into a liquid that meets certain requirements and pouring it into the mold.