Optimizing Full Mold Casting for Superalloy Castings
Introduction and Motivation. I have focused my recent manufacturing and process research on the practical optimization of full mold casting
Introduction and Motivation. I have focused my recent manufacturing and process research on the practical optimization of full mold casting
In my work with full mold casting, I have come to view material selection and performance evaluation as the central
From my perspective as the process engineer responsible for this development, the forklift head is not simply another steel casting.
In this work, I investigated the investment casting process for a specific AlSiCuSc alloy turbine volute. The turbine volute is
In my development work on precision casting workflows, I have repeatedly observed that the cleaning of stereolithography apparatus (SLA) resin
In my work with full mold casting, I have repeatedly seen that shrinkage porosity and shrinkage cavities are among the
I approach the problem of precision-cast boiler pipe fittings from the combined viewpoints of full mold casting, welding, thermodynamic stability,
In my work on gas turbine blade manufacturing, I treated rapid investment casting as an integrated full mold casting problem
I approached the problem of a hollow steel locomotive coupler as a coupled casting, solidification, stress, and microstructure problem. The
I investigate the viscosity behavior of wax used in full mold casting because the dimensional accuracy of the wax pattern
In this study, I investigate the stress and deformation behavior of wax patterns during the entire full mold casting preparation
In my analysis of modern precision manufacturing, alloy investment casting remains one of the most important routes for producing complex,
I have worked through the manufacturing route for a guide support used in a compression system, and I treat it
In my own laboratory practice, the phrase full mold casting describes far more than a single workshop operation. I use
I developed and qualified an investment casting process for a large second stage turbine moving blade. The blade has a
In my own engineering practice, I treat investment casting as a precision manufacturing system rather than as a single workshop
In my research, I focused on the quality control challenges encountered in the production of complex thin-walled stainless steel bearing