Optimization of Sand Mould Casting for a Tractor Saddle
In this study, I examined the replacement of forged steel with ductile iron for a tractor saddle produced by sand
In this study, I examined the replacement of forged steel with ductile iron for a tractor saddle produced by sand
I focused my research on rapid sand mould casting of a complex aluminium cylinder head, because this component combines thin
In this study, I investigated how 3D printed sand mould casting can be used to manufacture complex metal components with
As a researcher working on sustainable manufacturing, I focus on how the complexity of a casting influences the carbon emissions
I have examined a direct mechanical approach to sand mould casting that removes the wooden pattern from the centre of
In my development work on complex stationary blades, I have focused on a manufacturing route that can be described as
I began this study because the divided axle used in a tractor load-bearing axle is a safety-critical component that must
In my work on complex engine castings, I have found that sand mould casting remains one of the most flexible
In my study of automotive engine cylinder block manufacturing, I treated sand mould casting as the central production route because
In my experience with heavy marine components, the propeller is never just a bronze shape. It is a hydrodynamic device,
I have carried out this study to address the high energy consumption, low resource efficiency, and significant environmental impact of
In my retrofit project, I focused on the automatic control of a horizontal sand mould casting molding machine. The goal
I have spent many years developing and controlling foundry processes for steel components that must resist pressure, wear, and cyclic
In the field of sand mould casting, large thin-walled cast iron components are widely used in machine tool manufacturing, automotive
I developed an alcohol-based coating system specifically for sand mould casting when external chills are placed in the mould cavity.
I investigated the heat-transfer behaviour of annular castings produced by sand mould casting under natural cooling and forced air-cooling conditions.
I have focused my research and development work on the creation of a practical computer-aided design system for axis-type parts