Evaporative Pattern Casting for Boiler Pipe Fittings
I carried out this investigation to connect the metallurgical behavior of heat-resistant austenitic steel with the practical requirements of precision
I carried out this investigation to connect the metallurgical behavior of heat-resistant austenitic steel with the practical requirements of precision
I began this study because I needed a faster and more economical way to develop gas turbine blades without committing
I investigated the precision casting process and solidification microstructure of a steel locomotive coupler because this component must connect railway
In this work, I investigate the high-precision modeling of wax viscosity during wax pattern injection forming for investment casting, with
I have studied the entire stress and deformation history of wax injection molding for investment casting because the wax pattern
In my work on investment casting for aerospace and energy components, I have repeatedly seen that the ceramic shell is
I have systematically reviewed the recent progress of ceramic cores used in alloy investment casting, and I have also extended
I was assigned to develop a manufacturing route for a compression system guide support that would replace a welded assembly
I approached the K403 shell casting problem as a fully integrated investment casting development task rather than as a single
I review the key materials, forming mechanisms, and quality-control strategies that govern wax pattern fabrication for superalloy investment casting. The
I have spent considerable time studying how digital manufacturing can be merged with traditional metal shaping. In my view, the
I developed the manufacturing route for a large second-stage turbine moving blade by treating every operation as part of one
In my own practice, I have come to view investment casting not as a single operation but as a chain
I have spent a significant part of my recent engineering work on the intersection of additive manufacturing, investment casting, and
I selected a large, complex, thin-walled casing made from ZTi60 high-temperature titanium alloy as the focus of my casting development
I investigated a complex thin-walled stainless steel bearing seat used in food-processing equipment. The part is produced by investment casting,
I reviewed a small shell casting that had a compact outer envelope, a very uneven wall section, and a narrow