Archives

Malleable Iron vs. White Cast Iron

When considering malleable iron and white cast iron for a project, it’s essential to assess their respective properties and the specific requirements of the application. Here is a comparison between malleable iron and white cast iron: Malleable Iron: White Cast Iron: When choosing between malleable iron and white cast...

spacer
spacer

Gray Cast Iron vs. White Cast Iron

When deciding between gray cast iron and white cast iron for a project, it’s important to consider their respective properties and the specific requirements of the application. Here is a comparison between gray cast iron and white cast iron: Gray Cast Iron: White Cast Iron: When choosing between gray...

spacer

Ductile Iron vs. Other Cast Irons

When selecting the right material for a project, it’s essential to consider the specific requirements and characteristics of the application. Here is a comparison between ductile iron and other common cast irons to help you make an informed decision: When choosing between ductile iron and other cast irons, it’s...

spacer
spacer

Ductile Iron vs. White Cast Iron

When deciding between ductile iron and white cast iron for a project, it’s important to consider their respective properties and the specific requirements of the application. Here is a comparison between ductile iron and white cast iron: Ductile Iron: White Cast Iron: When choosing between ductile iron and white...

spacer

White Cast Iron vs. Ductile Iron (Nodular Cast Iron)

White cast iron and ductile iron, also known as nodular cast iron, are two distinct types of cast iron with different microstructures and properties. Let’s compare white cast iron and ductile iron in terms of their microstructure, mechanical properties, and applications: White Cast Iron: Ductile Iron (Nodular Cast Iron):...

spacer
spacer
spacer

Improvement of white cast iron structure

The engine block is one of the most complicated parts in the cast parts, and various sand cores are needed in the mold cavity, cylinder barrel, oil duct and water channel. At the same time, the thickness of each part varies, ranging from 3 to 20mm. Therefore, during the...

spacer