Design of Risers and Chillers for Pump Gland Steel Castings
For steel castings, in order to ensure that the riser can effectively feed the steel castings, it is necessary to […]
News
News
Selection of Pouring Position for Pump Gland Steel Castings
Considering the structural characteristics of the product such as difficulty in molding ribs and small weight of steel castings, as
News
Process of Steel Casting for Pump Gland
Name Texture of material Weight/kg Length/mm Width/mm Height/mm Maximum wall thickness/mm Minimum wall thickness/mm Gland ZG230- 450 15.5 270 270
News
Microhardness distribution of A356 aluminum alloy wheel rim during spinning process
The microhardness of the middle part of the rim and the inner rim near the spinning wheel area (upper) and
Scientific
Numerical simulation and microstructure and properties of alloy casting process
With the rapid development of China’s economy, especially the infrastructure industryThe rise of the Internet of Things has led to
Scientific
3D printing technology and casting technology integration application and exhibition
Preface 3D printing, as the biggest driving force technology of intelligent manufacturing, isThe reason for the delay in large-scale implementation
News
The Hidden Dangers: Uncovering Internal Defects in Heat Treated Components
Internal defects in heat-treated components can pose significant risks to their structural integrity and performance. Detecting and addressing these hidden
News
Tracing the Root Causes of Casting Defects
Tracing the root causes of casting defects requires a systematic approach and careful analysis of various factors involved in the
News
Tensile properties of A356 aluminum alloy wheel rim during casting and spinning process
Cut the bar tensile specimen from the inner rim part along the tangent direction. The tensile test shall be conducted
News
Quality Control in Steel Castings: Ensuring High-Performance Components
Quality control is crucial in steel casting to ensure the production of high-performance components. Here are some key aspects of
News
Microstructure Analysis of A356 Aluminum Alloy Wheel Rim
The metallographic sample of longitudinal section is cut from the inner rim of the spinning blank rim. The sample is
News
Hot spinning test of A356 aluminum alloy wheel rim
The process flow of aluminum alloy wheel casting+spinning composite forming (referred to as casting and spinning): molten aluminum melting –
News
Improvement of casting and spinning process for A356 aluminum alloy wheel rim
The geometry and size of the cast spinning wheel of the aluminum alloy wheel directly affect the contact area between
News
Analysis of insufficient performance of aluminum alloy cast wheel inner rim
Taking a certain type of wheel as the research object, the A356 cast-rotating aluminum alloy wheel blank is mainly manufactured
News
Casting and spinning process of A356 aluminum alloy wheel rim
A356 alloy has good casting performance, and can obtain high strength and good plasticity after heat treatment. At present, A356
News
X-Ray Nondestructive Testing of Die Casting Process of AlSi7Mg Aluminum Alloy for Automobile
Under the conditions of the same mold locking force, injection force, mold filling speed and pouring temperature (700 ℃), X-ray
News
Mechanical properties of die casting process of AlSi7Mg aluminum alloy for automobile
The mechanical properties of AlSi7Mg alloy specimens prepared at different mold preheating temperatures were tested under the same mold locking
Scientific
Trial production of die casting process of AlSi7Mg aluminum alloy for automobile
Si Mg Ti Sr Zn Cu Al 7.275 0.391% 0.0518% 0.0123% 0.00089% 0.00197% 92.2% Table 1 shows the chemical composition
News
Die Casting Process of AlSi7Mg Aluminum Alloy for Automobile
AlSi7Mg alloy has been widely used in aerospace and automotive industry due to its excellent formability, high corrosion resistance and
Scientific
Numerical simulation of low pressure sand casting process for aluminum alloy moving coil skeleton
The electric vibration table can meet the simulation requirements under various vibration conditions, andHas been applied to the simulation test
Scientific
Engine stainless steel parts casting process is excellentTo change
Investment casting process can produce complex shapes, high surface finishGood, high dimensional and shape accuracy castings are widely used in
Scientific
Trial production of ductile iron castings gear box by pouring
According to the simulation results of the gear box, the prototype is trial-produced. The mechanical properties, metallography, magnetic particle inspection
News
Research on the casting process of pump body based on sand 3D printing
Sand 3D printing is a fast production technology for making sand molds.This technology only requires the design of the casting
Scientific
Design and defect prevention of a ductile iron casting process for lost foam casting
A ductile iron developed and designed in this study for lost foam castingThe casting weight is 180kg, and its structural
Scientific
Gear box casting process of ductile iron castings
40/70 mesh wood modified furan resin sand is used for manual molding, and the ratio of curing agent is 65wt.%
News
Melting process of nodular cast iron gear box
The furnace charge is mainly pig iron, scrap steel and return charge, which are melted by medium frequency induction furnace.
News
Casting Technology of Thin-walled Low-temperature Ductile Iron Gear Box
With the rapid development of China’s rail transit equipment, China has been at the forefront of the world in the
Scientific
Numerical simulation of precision casting process for iron-based high-temperature alloy blades
Introduction Aircraft jet engines, marine gas turbines, industrial gas turbinesturbines are commonly used to drive machinery in many fields, such
News
Numerical simulation of investment casting of turbine guide
The gravity top-pouring casting process is selected. Due to the complex internal structure of the turbine guide casting, hot spots
News
NDT for investment casting of turbine guide
As shown in the figure, the finished product of the investment casting of the turbine guide poured by this gating