Author name: zhycasting

Graphite parameters such as type, content and length in gray cast iron have an important influence on its tensile strength.

Fig. 1 shows the scanning electron microscope BSE photos of gray cast iron samples with different molybdenum content. It can

Figure 1 and Figure 2 show the microstructure of gray cast iron corroded by 4% Vol. nitric acid alcohol under

Figure 1 shows the graphite morphology of samples S1 ~ S4 in Table 1 observed under scanning electron microscope. According

HT250 finished brake hub produced by ZHY casting is melted in cy-sp35-vim temperature controlled high frequency induction furnace, argon is

The microstructure of primary austenite after heat treatment of four kinds of experimental gray cast iron is shown in the

Gray cast iron wheel hub is one of the important parts of heavy-duty truck. When heavy-duty truck travels down the

Gray cast iron is a low-cost material. It has good thermal conductivity, good mechanical properties and wear resistance due to

As shown in the figure, the hardness and tensile strength results of vanadium titanium gray cast iron with different components

Figures (a) ~ (d) are metallographic photos of vanadium titanium gray cast iron with different components. It can be seen