cone crusher

Three dimensional wear, also known as impact surface wear, mainly describes the wear mechanism on the three body impact abrasive

Two dimensional wear is also considered as surface wear. At this time, the wear mainly occurs on a two-dimensional plane,

Dimensional wear, also known as phase change wear, mainly describes the microstructure evolution and work hardening in the normal direction

Quenching process is an important part of the production process of iron and steel materials. The selection of quenching medium

The metallographic structure photo of the sample is given in Fig. 1. Under various process parameters, the experimental steel obtained

The normal temperature tension of the heat treated bainite Martian multiphase wear-resistant cast steel was carried out on the wdw-02a

According to the results of phase transformation point measurement, thermal expansion curve, metallographic structure observation and microhardness measurement, the self-designed

For the steel with determined composition, the relationship curve between transformation amount and time during the continuous cooling transformation of

JMatPro thermodynamic software is used to simulate the property diagram of the experimental steel under the designed composition system. The

The wear of crusher liner is mainly abrasive wear. Abrasive wear is a kind of wear caused by the migration

The measured chemical composition of the experimental material is obtained by chemical analysis method and meets The measured chemical composition