This article focuses on the research of the rheological squeeze casting process of the AI-11Zn-1.8Mg-0.9Cu-0.15Zr-0.15Sc casting aluminum alloy. Through a […]
I. Introduction In the automotive industry, the demand for high-performance and lightweight components is constantly increasing. Aluminum alloys, with their
1. Introduction With the rapid development of consumer electronic products, the requirements for materials and manufacturing processes are increasing. Squeeze
This article focuses on the influence of Sc and Zr on the microstructure and mechanical properties of squeeze-cast ZL205A alloy.
1. Introduction 1.1 Background In recent years, the consumer electronics industry has witnessed rapid growth and continuous innovation. The demand
1. Introduction In recent years, with the increasing concern of consumers about the “energy conservation and environmental protection” and “driving
1. Introduction Aluminum alloys have become an important material in modern industry due to their excellent mechanical properties, low density,
This article focuses on the wrinkling and shrinkage cavity defects that occur during the lost foam casting process of ductile
1. Introduction Aluminum alloy castings have gained significant popularity in various industries due to their favorable properties such as low
This article focuses on the process simulation design and verification of large-size turbine castings. It begins with an introduction to
1. Introduction The automotive industry is constantly evolving, with a strong emphasis on improving vehicle performance, reducing weight, and enhancing
1. Introduction In modern industrial production, aluminum alloys have become an important material due to their excellent mechanical properties, low
1. Introduction Casting is one of the most important manufacturing processes, which has a wide range of applications in various
1. Introduction The metal pressure vessel industry is an important part of the equipment manufacturing industry and reflects a country’s
1. Introduction 1.1 Background of Cylinder Head Integrated Exhaust Technology The cylinder head integrated exhaust technology is a significant breakthrough
1. Introduction Al-7Si-0.4Mg (A356) alloy is widely used in automotive aluminum alloy components due to its low density, high specific
1. Introduction Aluminum alloys have become crucial materials in various industries, especially in automotive and aerospace, due to their low
This article focuses on the remarkable achievements and progress in agriculture and rural areas in a particular region (Qujiang). It
Al-Li alloys have attracted extensive attention in the aerospace and other fields due to their excellent properties such as high
With the development of the times and the progress of science and technology, new energy vehicles have been widely promoted
With the increasing awareness of the environment and safety, the lightweight and safety of transportation tools have become a major
According to the national standard for metallographic examination of ductile iron, the cross-sectional metallographic structure of the crankshaft hole is
The high-pressure and low-speed characteristics of squeeze casting technology refine and densify the alloy structure, while also strengthening the alloy
As a key component of the automotive chassis, the steering knuckle plays an important role in the driving process. The
In terms of shape, it is difficult to distinguish the blanks produced by these two processes. If you see a
