wear-resistant castings

The bimetallic jaw wear-resistant castings were successfully wound by using the bimetallic liquid winding injection / transformation molding technology of […]

There are two traditional methods to obtain bainitic steel: (1) Isothermal quenching method: heat the steel to a certain temperature

As shown in Figure 1, the types of bainite structure include upper bainite, lower bainite, carbide free bainite, granular bainite,

The chemical composition has a great influence on the mechanical properties and microstructure of bainitic Martian multiphase wear-resistant cast steel.

Surface strengthening technology includes surface treatment, surface processing, surface coating, surface modification and thin film technology. Surface strengthening technology has

The total amount of alloy of low alloy wear-resistant cast steel is less than 5%, and the total amount of

The work hardening ability of high manganese steel depends on the size of stress. The yield strength of high manganese

In the wear test of iron and steel materials, the wear resistance can be obtained by taking the reciprocal of

Austenitic Medium Manganese Steel is a new wear-resistant material obtained by reducing the content of manganese and adding a certain

Manganese steel, as a large category of wear-resistant steel, mainly includes ordinary high manganese steel and modified high manganese steel.

Four dimensional wear is also considered as corrosive wear, in which time is the fourth dimension outside the three-dimensional space.

A lot of research has been done on the changes of mechanical properties and microstructure of bainitic Martian multiphase wear-resistant

There are three main forms of damage and failure of iron and steel materials: fracture, corrosion and wear. Among them,