Thermoelastoplastic model in thermal stress model of sand casting
At present, the THERMOELASTIC-PLASTIC model in the thermal stress model of sand casting is widely used. The model does not […]
News
Scientific
Stress and deformation analysis of frame sand casting process
Figure 1 shows the displacement and overall deformation distribution of sand casting frame after cooling, dropping and unpacking. As can
News
Numerical simulation of water glass sand casting process of rolling mill frame
Reasonable experimental device is designed for the measurement of thermophysical parameters of glass quartz sand used in actual sand casting
Scientific
Effect of pattern density on mold filling speed of liquid metal in Lost Foam Casting
The test results are shown in the table. Pattern density (g/I) Total mold filling time (s) Average filling speed (cm/s)
News
Influence of pouring temperature on mold filling speed in lost foam casting of gray cast iron
The changing trend of the influence of pouring temperature on the average mold filling speed of molten metal in lost
Scientific
Analysis of residual stress in cooling process of frame sand casting process
After the sand casting frame is poured, it is cooled in the mold cavity until the central riser reaches a
News
Numerical simulation of sand casting process
With the rapid development of China’s energy, metallurgy and other industries, the trend of large-scale equipment urgently needs high-quality steel
Scientific
Effect of negative pressure on filling speed of liquid metal in lost foam casting
In the filling process of liquid metal in gray iron lost foam casting, there is an air gap between the
News
Lost foam casting in Italian
Since the early 1980s, fata company of Italy, in cooperation with sapolest company of France, has designed and manufactured several
Scientific
Effect of pouring temperature on mold filling speed of gray cast iron lost foam casting
The test results are shown in the table: Pouring temperature (℃) Total mold filling time (s) Average filling speed (cm/s)
Scientific
Analysis of hot cracking trend in solidification process of frame sand casting process
In the post-processing results of stress field in ProCAST software, there is an option to judge the hot crack trend
News
Development of numerical simulation of sand casting in China
China has also carried out numerical simulation research on solidification of sand castings since 1978. Although it started relatively late,
News
Classification of lost foam casting production in China
In terms of lost foam casting for mass production, it can be divided into two categories according to the current
News
Coating and dry operation of lost foam casting coating
Lost foam casting coating is different from traditional sand mold coating. The surface of lost foam castings is the inner
News
Lost foam casting in UK
In Britain, the earliest application of lost foam casting is the British cast steel research and Trade Association, whose method
Scientific
Distribution of thermal stress field during solidification of frame sand casting process
Due to the thick section structure and long solidification time of sand casting frame steel castings, the stress field in
News
Foreign progress in numerical simulation of sand casting
The research field of Solidification Numerical Simulation of sand castings abroad started early, which began in the 1960s. Its development
Scientific
Properties of bimetal composite pipe by centrifugal casting
High wear resistance, high hardness and good toughness are important indexes of bimetal composite pipe, which are directly related to
News
Application of casting coating to engine cylinder head
The sand cores in the inner cavity of the cylinder head produced by the coated sand process are (generally refers
News
Lost foam casting in Japan
Japan has used this method to produce large castings since the 1960s, such as Kobe iron Institute, which is still
Scientific
Analysis of temperature variation curve of frame sand casting process
In order to specifically and clearly study the temperature change of different parts of the rack with time, it is
News
Research content of numerical simulation of sand mold casting
Because the sand mold casting process is very complex and difficult to study, it still depends on experience to a
News
Composition of lost foam casting coating
The coating raw material lost foam casting coating is composed of refractory, binder, carrier, suspending agent and special additives such
News
Lost foam casting in American
The United States was the first country to apply the lost foam casting method and was the first to carry
News
Influence of technological factors on mold filling speed of gray cast iron lost foam casting
The theoretical research of lost foam casting started late. In the 1950s and 1960s, some research was carried out on
News
Present situation of sand casting production of rolling mill frame
The frame is the key bearing part of all kinds of rolling mills. When rolling products, all kinds of rolling
Scientific
Cloud diagram of temperature distribution at typical time of frame sand casting process
The simulation analysis of the temperature field of the frame in sand casting includes the solidification of the frame in
News
Performance test of lost foam casting coating
The performance test of lost foam casting coating is a necessary condition to stabilize the production process and ensure the
News
Development of lost foam casting
Lost foam casting has outstanding advantages, which has attracted more and more attention of foundry workers in recent years. Lost
Scientific
Setting of thermophysical parameters of frame sand casting
The setting of thermophysical parameters in the simulation process includes the determination of sand casting – zg230-450 and mold –