steel casting

Alloy selection plays a crucial role in steel casting, as it directly influences the material properties of the final product. […]

Steel casting is a widely used manufacturing process that offers numerous advantages in terms of strength, durability, and versatility. This

When selecting the right steel casting process, several considerations and selection criteria should be taken into account. Here are some

The chemical composition and mechanical properties of steel castings shall comply with the relevant provisions of General technology Conditions for

By conducting 3D modeling design on the steel castings of the bow column of a 13000t heavy lifting vessel, the

In CATIA, density and material information can be assigned to the direct physical model. The steel casting of the bow

1. CAD profile acquisition In the preliminary design of the hull structure, the smooth outer plate surface and the design

1. Design Preparation The design of ship steel castings is an important component of ship structure design, involving components such

Analysis suggests that casting defects such as shrinkage porosity and cracks occur during the casting of the front support of

Sampling and testing from the fracture of failed steel castings showed that their chemical composition was qualified, and their mechanical

Internal shrinkage is one of the common casting defects in the production process of steel castings. Shrinkage cavities are mostly

Through analysis and research on the structure and technical requirements of the steel casting, the following casting difficulties are obtained:

In order to further verify the simulation results after the process optimization of steering knuckle steel castings and analyze whether

After the improvement and optimization of the process, 4 boxes/4 pieces of trial production were carried out. After the dissection

Aiming at the problems existing in the initial process trial production of guide rail steel castings, the initial casting process

According to the drawing requirements, the material of the guide rail steel casting is ZG32MnMo. According to the relationship between

The project of “Application Demonstration of Core Steel Castings and Casting Production Technology for 800~1000 MW Super Large Hydropower Units”

(1) During the mold filling process, the steering knuckle steel casting process uses sand gravity casting. Through the analysis of

Digital casting with computer simulation as the core has been widely used in the field of casting. With the development

This product is produced using 3D printing sand molds. Therefore, 3D printing technology is fully utilized in the sand mold

The upper surface of the steel casting is easy to produce defects such as sand holes, air holes and slag