News

The design takes the tractor split axle housing as the research object. The axle housing is made of zg40mn low

When the molten metal is poured into the mold, the volume shrinkage will occur during cooling and solidification. This shrinkage

The numerical simulation of temperature field is the basis of ProCAST software simulation, and also the core module. Through the

In the filling process, the flow of molten metal will have a great impact on the quality of the axle

ProCAST casting computer simulation process: firstly, Creo software was used to establish the three-dimensional numerical model of the casting system

The gating system is the channel to guide liquid metal into the mold cavity in sand mold. Its structure is

Numerical simulation is a method that uses the correspondence between different things to verify measures. Numerical simulation is irreversible. Casting

Casting process parameters mainly include dimensional tolerance, linear shrinkage, draft angle and other aspects. The determination of these process parameters

Generally speaking, the higher the pouring temperature is, the better the fluidity of alloy liquid is, and the more favorable

For sand mold casting, in order to realize sand molding, mold taking, pouring riser setting and sand core installation, the

The pouring position usually refers to the position of the axle housing in the mold when pouring. The pouring position

For cast steel, the main raw materials include scrap steel, ferrosilicon, manganese iron and aluminum alloy deoxidizer, and the main

(1) Scrap steel is the main raw material for casting smelting. Two samples are randomly selected from each batch for

The structural types of axle housing can be roughly divided into three types: open type, integral type and combined type.