casting process

Cut the bar tensile specimen from the inner rim part along the tangent direction. The tensile test shall be conducted

The process flow of aluminum alloy wheel casting+spinning composite forming (referred to as casting and spinning): molten aluminum melting –

The geometry and size of the cast spinning wheel of the aluminum alloy wheel directly affect the contact area between

Taking a certain type of wheel as the research object, the A356 cast-rotating aluminum alloy wheel blank is mainly manufactured

A356 alloy has good casting performance, and can obtain high strength and good plasticity after heat treatment. At present, A356

Casting is the current production process of mining support parts, which has the characteristics of short production cycle, high forming

The semi-closed and semi-open gating system is adopted, and the sectional area ratio of the runner at each position is:

The saddle is a key component connecting the suspension and frame. Due to the newly developed saddle being a cast

Simulating and analyzing the metal flow process during mold filling, the heat transfer phenomenon during mold filling, and the coupling

Although the casting process simulation has made a lot of valuable achievements in the past few decades, some important research

At present, the application of computer in simulated casting process mainly focuses on the following aspects: (1) Simulation of filling

The relevant research in China began in the late 1970s, and although it started late, it developed rapidly. In 1980,